{"__v":1,"_id":"55e896f0315c421700d43b56","category":{"__v":1,"_id":"55e896ef315c421700d43b48","pages":["55e896f0315c421700d43b51","55e896f0315c421700d43b52","55e896f0315c421700d43b53","55e896f0315c421700d43b54","55e896f0315c421700d43b55","55e896f0315c421700d43b56","55e896f0315c421700d43b57","55e896f0315c421700d43b58"],"project":"54f78bd68d53ed17000116b3","version":"55e896ee315c421700d43b47","sync":{"url":"","isSync":false},"reference":false,"createdAt":"2015-03-04T22:48:55.455Z","from_sync":false,"order":0,"slug":"first-use","title":"First Use"},"project":"54f78bd68d53ed17000116b3","user":"54f78bb50a3cbb0d00d6668c","version":{"__v":1,"_id":"55e896ee315c421700d43b47","project":"54f78bd68d53ed17000116b3","createdAt":"2015-09-03T18:52:30.275Z","releaseDate":"2015-09-03T18:52:30.275Z","categories":["55e896ef315c421700d43b48","55e896ef315c421700d43b49","55e896ef315c421700d43b4a","55e896ef315c421700d43b4b"],"is_deprecated":false,"is_hidden":false,"is_beta":false,"is_stable":true,"codename":"","version_clean":"1.2.0","version":"1.2"},"updates":["54f9dc7c67e8f20d0096daaa"],"next":{"pages":[],"description":""},"createdAt":"2015-03-05T00:55:54.665Z","link_external":false,"link_url":"","githubsync":"","sync_unique":"","hidden":false,"api":{"results":{"codes":[]},"settings":"","auth":"required","params":[],"url":""},"isReference":false,"order":5,"body":"Turn on the power switch to your Argentum.\n\nWe're going to check the voltage of the power supply that drives the cartridges. If you purchased an assembled Argentum, this should already be set, but you should double check as things can change in transit.\n\nIn the **Console** tab of ARC, enter the following command and hit enter or click *Send*.\n[block:code]\n{\n  \"codes\": [\n    {\n      \"code\": \"volt\",\n      \"language\": \"text\"\n    }\n  ]\n}\n[/block]\nYou printer should respond by returning a voltage around 9.0V.\n[block:callout]\n{\n  \"type\": \"warning\",\n  \"title\": \"Low Voltage\",\n  \"body\": \"If your voltage is around 4V, make sure that your Argentum is plugged in and turned on.\"\n}\n[/block]\nIf the voltage is between 8.90V and 9.10V, you're good to go and can move on to the next section. If not, keep reading.\n\nThe new motherboard as of v1.2 has automatic voltage adjustment so you should not need to adjust anything. If there is a problem, please contact support [**here**](http://cartesianco.zendesk.com/hc/en-us/requests/new) to get things resolved quickly.\n\n[**Next >**](doc:adjust-motor-current)","excerpt":"9 is the magic number","slug":"set-voltage","type":"basic","title":"Set Voltage"}

Set Voltage

9 is the magic number

Turn on the power switch to your Argentum. We're going to check the voltage of the power supply that drives the cartridges. If you purchased an assembled Argentum, this should already be set, but you should double check as things can change in transit. In the **Console** tab of ARC, enter the following command and hit enter or click *Send*. [block:code] { "codes": [ { "code": "volt", "language": "text" } ] } [/block] You printer should respond by returning a voltage around 9.0V. [block:callout] { "type": "warning", "title": "Low Voltage", "body": "If your voltage is around 4V, make sure that your Argentum is plugged in and turned on." } [/block] If the voltage is between 8.90V and 9.10V, you're good to go and can move on to the next section. If not, keep reading. The new motherboard as of v1.2 has automatic voltage adjustment so you should not need to adjust anything. If there is a problem, please contact support [**here**](http://cartesianco.zendesk.com/hc/en-us/requests/new) to get things resolved quickly. [**Next >**](doc:adjust-motor-current)