{"_id":"55e896f0315c421700d43b58","category":{"_id":"55e896ef315c421700d43b48","__v":1,"version":"55e896ee315c421700d43b47","pages":["55e896f0315c421700d43b51","55e896f0315c421700d43b52","55e896f0315c421700d43b53","55e896f0315c421700d43b54","55e896f0315c421700d43b55","55e896f0315c421700d43b56","55e896f0315c421700d43b57","55e896f0315c421700d43b58"],"project":"54f78bd68d53ed17000116b3","sync":{"url":"","isSync":false},"reference":false,"createdAt":"2015-03-04T22:48:55.455Z","from_sync":false,"order":0,"slug":"first-use","title":"First Use"},"project":"54f78bd68d53ed17000116b3","__v":0,"user":"54f78bb50a3cbb0d00d6668c","version":{"_id":"55e896ee315c421700d43b47","__v":1,"project":"54f78bd68d53ed17000116b3","createdAt":"2015-09-03T18:52:30.275Z","releaseDate":"2015-09-03T18:52:30.275Z","categories":["55e896ef315c421700d43b48","55e896ef315c421700d43b49","55e896ef315c421700d43b4a","55e896ef315c421700d43b4b"],"is_deprecated":false,"is_hidden":false,"is_beta":false,"is_stable":true,"codename":"","version_clean":"1.2.0","version":"1.2"},"updates":[],"next":{"pages":[],"description":""},"createdAt":"2015-03-05T18:18:45.933Z","link_external":false,"link_url":"","githubsync":"","sync_unique":"","hidden":false,"api":{"results":{"codes":[]},"settings":"","auth":"required","params":[],"url":""},"isReference":false,"order":7,"body":"[block:callout]\n{\n  \"type\": \"warning\",\n  \"title\": \"Turn off the power to your Argentum before continuing.\"\n}\n[/block]\nGripping the lowest part of the cartridge carriage (close to the rods), move the carriage to roughly the centre of the the printer area.\n[block:callout]\n{\n  \"type\": \"warning\",\n  \"title\": \"Turn on the power to your Argentum before continuing.\"\n}\n[/block]\nStart **ARC** if it is not already running. Select the **Console** tab and then click the *Calibrate* button.\n\nYour printer should move to all four corners before returning to the *home* position in the front left corner of the printer area.\n\nYou're done! You should not need to calibrate your Argentum again as it will store this information.\n[block:callout]\n{\n  \"type\": \"success\",\n  \"title\": \"You're done with configuring your Argentum!\",\n  \"body\": \"If you are assembling your Argentum from a kit, return to the assembly guide now. Then head back here when you're done to do you first test print!\\n\\nIf you have an assembled unit, continue this guide by printing your first circuit!\"\n}\n[/block]\n[**Next**](doc:first-circuit)","excerpt":"Beep boop","slug":"calibration","type":"basic","title":"Calibration"}

Calibration

Beep boop

[block:callout] { "type": "warning", "title": "Turn off the power to your Argentum before continuing." } [/block] Gripping the lowest part of the cartridge carriage (close to the rods), move the carriage to roughly the centre of the the printer area. [block:callout] { "type": "warning", "title": "Turn on the power to your Argentum before continuing." } [/block] Start **ARC** if it is not already running. Select the **Console** tab and then click the *Calibrate* button. Your printer should move to all four corners before returning to the *home* position in the front left corner of the printer area. You're done! You should not need to calibrate your Argentum again as it will store this information. [block:callout] { "type": "success", "title": "You're done with configuring your Argentum!", "body": "If you are assembling your Argentum from a kit, return to the assembly guide now. Then head back here when you're done to do you first test print!\n\nIf you have an assembled unit, continue this guide by printing your first circuit!" } [/block] [**Next**](doc:first-circuit)